MXC | Round pots 6°
Trouble-free denesting from the stack
Pronounced shoulder indents and a high degree of lateral stability ensure easy denesting from the stack in the pot magazine.Technical data
Item
|
|
|
|
|
|
|
||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MXC 5,5 |
![]() ![]() Profile bottom V-1 Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf zwei Ebenen: |
2 1/8 | 2 | 2.64 fl oz | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 9 |
![]() ![]() Multi hole profile bottom XIII-1 Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
3 1/2 | 2 2/3 | 9.47 fl oz | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 10 |
![]() ![]() Multi hole profile bottom XIII-1 Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
4 | 3 | 12.78 fl oz | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 10,5 |
![]() ![]() Multi hole profile bottom XIII Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
4 1/8 | 3 1/8 | 14.81 fl oz | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 11 |
![]() ![]() Multi hole profile bottom XIII Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
4 1/3 | 3 1/4 | 1.07 pt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 12 |
![]() ![]() Multi hole profile bottom XIII Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
4 3/4 | 3 2/3 | 1.40 pt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 13 |
![]() ![]() Multi hole profile bottom XIII Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
5 | 3 7/8 | 1.71 pt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 14 |
![]() ![]() Multi hole profile bottom XIII Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
5 1/2 | 4 1/3 | 1.10 qt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 15 Z |
![]() ![]() Multi hole profile bottom with bayonet lock XXVII Thorough, fast irrigation and drainage as well as aeration on four levels: 1. Level with direct contact with the bottom: sloped drainage 2. Level with distance of 1.5 mm to the contact surface: optimum capillary drainage 3. Level with distance to the contact surface: fast dripping drainage, maximum aeration 4. Level with slopped drainage openings (internal side slits) |
6 | 4 1/4 | 1.41 qt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 15 F |
![]() ![]() Multi hole profile bottom with bayonet lock XXVII Thorough, fast irrigation and drainage as well as aeration on four levels: 1. Level with direct contact with the bottom: sloped drainage 2. Level with distance of 1.5 mm to the contact surface: optimum capillary drainage 3. Level with distance to the contact surface: fast dripping drainage, maximum aeration 4. Level with slopped drainage openings (internal side slits) |
6 | 5 2/3 | 1.81 qt | show | show | ||||||||||||||||||||||
|
||||||||||||||||||||||||||||
MXC 15 W |
![]() ![]() Multi hole profile bottom XIII-2 Vollständige und schnelle Be- und Entwässerung sowie Belüftung auf vier Ebenen: 1. Ebene mit direktem Bodenkontakt: Entwässerung durch Schräge 2. Ebene mit einem Abstand von 1,5 mm zur Aufstellfläche: optimale kapillare Entwässerung 3. Ebene mit Abstand zur Aufstellfläche: schnell tropfende Entwässerung, maximale Belüftung 4. Ebene mit Entwässerungsöffnungen auf der Schräge (innenliegende Seitenschlitze) |
6 | 4 1/4 | 1.41 qt | show | show | ||||||||||||||||||||||
|
F: Extra high version
W: Wick bottom
Z: special version
Packaging
|
||||||
---|---|---|---|---|---|---|
Item
|
|
|
|
|
|
|
MXC 5,5 |
![]() |
4,200 | 24 | 100,800 | ||
MXC 9 |
![]() |
1,664 | 22 | 36,608 | 52,500 | |
MXC 10 |
![]() |
1,702 | 20 | 34,040 | 42,180 | |
MXC 10,5 |
![]() |
1,430 | 20 | 28,600 | 37,620 | |
MXC 11 |
![]() |
1,200 | 20 | 24,000 | 30,240 | |
MXC 12 |
![]() |
756 | 22 | 16,632 | 23,800 | |
MXC 13 |
![]() |
738 | 22 | 16,236 | 20,400 | |
MXC 14 |
![]() |
640 | 22 | 14,080 | 17,500 | |
MXC 15 Z |
![]() |
405 | 30 | 12,150 | 18,630 | |
MXC 15 F |
![]() |
297 | 30 | 8,910 | 13,500 | |
MXC 15 W |
![]() |
405 | 30 | 12,150 | 18,630 | |
F: Extra high version
W: Wick bottom
Z: special version
Advantages
![Better plants](/us/dam/jcr:3f703437-47e6-4603-b6a3-28a68d5697ee/pikto-beste-pflanzen.png)
Reduced cultivation time
For rapid growth and healthy plants with ideal watering and drainage.![Video on YouTube Video on YouTube](/.imaging/mte/pop-theme/medium/dam/pop/services/images/pop-video-default-thumbnail.jpg/jcr:content/pop-video-default-thumbnail.jpg)
Optimal root growth
The absence of internal stacking ridges promotes optimum root growth.![Video on YouTube Video on YouTube](/.imaging/mte/pop-theme/medium/dam/pop/services/images/pop-video-default-thumbnail.jpg/jcr:content/pop-video-default-thumbnail.jpg)
Very low failure rates
Roots are not adversely affected or damaged by exposure to light. High covering colours are used in the production process.![Maximum efficiency](/us/dam/jcr:06e84f10-e920-4c07-9a10-88463f5a25ce/pikto-maximale-effizienz.png)
Trouble-free denesting from the stack
Pronounced shoulder indents and a high degree of lateral stability ensure easy denesting from the stack in the pot magazine.![Video on YouTube Video on YouTube](/.imaging/mte/pop-theme/medium/dam/pop/services/images/pop-video-default-thumbnail.jpg/jcr:content/pop-video-default-thumbnail.jpg)
Excellent stacking properties
The stacking is done through specially arranged stacking feet underneath the bottom not through internal stacking ridges.![Video on YouTube Video on YouTube](/.imaging/mte/pop-theme/medium/dam/pop/services/images/pop-video-default-thumbnail.jpg/jcr:content/pop-video-default-thumbnail.jpg)
Better handling
Pronounced pot shoulders for modern spacing-machine applications.Maximum stability
With no mounting feet, pots are more stable on conveyor belts.Reduced transport costs
The optimised dimensions as well as a special design ensure a higher loading degree both internally and in dispatch.![Effective sustainability](/us/dam/jcr:5e1e28a4-12f2-4811-a25a-5ab76c563632/pikto-effektive-ressourcenschonung.png)
Use of recycled materials
Careful preparation and intensive use of recycled plastics.![Video on YouTube Video on YouTube](/.imaging/mte/pop-theme/medium/dam/pop/services/images/pop-video-default-thumbnail.jpg/jcr:content/pop-video-default-thumbnail.jpg)
Reduced weight
Unrivalled low materials usage thanks to continuous design optimisation.Downloads
![](/.imaging/default/dam/pop/services/icons/icon-vorort.png/jcr:content.png)
On-site
Our sales representatives can come straight to your premises. Make an appointment now.
![](/.imaging/default/dam/pop/services/icons/icon-telefon.png/jcr:content.png)
+1 866-886-1556
Monday through Thursday: 8:00 – 17:00 p.m.
Friday: 8:00 – 15:30 p.m.
![](/.imaging/default/dam/pop/services/icons/icon-mail.png/jcr:content.png)
By e-mail
Twenty-four hours a day. We will get back to you as soon as possible.